Case, Hydrometer, Auxiliary

For field storage of extra, spare or seldom used (certified) hydrometers. This case will protect the hydrometer for shock or rough handling. Construction of heavy wall PVC tubing, fully cushioned with a felt liner.

Catalog Number	Capacity	Size
403B086	Single	15"
403B087	Single	7.5"

 

 

Case, Hydrometer, Three Place. Flip Top

For carrying three 15 inch hydrometers. It is made of plastic with separate compartments, for each compartment lined with felt. The lid has a 37-degree angle cut, which allows it to arc away from the hydrometers when open, thus preventing stem breakage. There are two models to choose from. One model has a spring loaded hinge that holds the lid open or closed under spring tension and the other model is equipped with a standard hinge and a positive tension-type latch which holds the lid securely closed until released.

403B088  Spring loaded hinge.  16 ½ x 4 ¾ x 2
403B089 Positive tension latch. 16 ½ x 4 ¾ x 2

 

 

Case, Hydrometer, Three Place.

For carrying three 15 inch hydrometers. It is made of plastic with a stainless steel hinge and snap catch. It offers the following features:
   1. Gives the operator full view of all three hydrometers to enable him to select the correct range hydrometer.
   2. Minimizes breakage of the stem when the hydrometers are being removed from the case.
   3. Minimizes breakage of the stem by eliminating the snap action of the lid if the hydrometer is not all the way in.
   4. A push button lock.
   5. The weight of the case prevents it from blowing off the top of the tank as they operator runs his tests.
   6. The operator no longer has to write the data on his cuff, and or notebook. The white 3" x 5" square on the top of the case allows the operator to write with a standard lead pencil test data that can be transferred to trip tickets and simply erased with a damp thumb.

Dimensions 15 ¾" x 4 5/8" x 1 3/8" wg. 1 ½ lbs.

Catalog Number 403B392

CYLINDER, HYDROMETER, Plastic

Ideal for use in testing the gravity of crude oil. Transparent and light weight.

Catalog Number	Cylinder ID	Height
403B096	1-3/8"	15"
403B097	1-7/8"	8"
403B098	1-7/8"	15"

 

CYLINDER, HYDROMETER, Brass

Catalog Number	Cylinder ID	Height
403B099	1-7/8"	15"

 

CYLINDER, HYDROMETER, Glass with pourout

Catalog Number	Cylinder ID	Height	Capacity
403A100	38 mm	375 mm	340 ml
403A101	50 mm	375 mm	600 ml

 

 

CYLINDER, GRADUATED, Plastic

Calibrated to contain/deliver at 20 degrees C. Single molded-in metric scale, transparent with pour-out spout. Compatible with virtually any chemical for typical brief use. Shatterproof with large base.

Catalog Number	Capacity ml	Sub-Division ml
403A102	100	1
403A103	500	5
403A104	1000	10
403A105	2000	20

 

 

CYLINDER, GRADUATED, Glass

Calibrated to deliver. Single metric scale with 0 at the bottom and total graduated capacity at the top line. With pour-out spout.

Catalog Number	Capacity ml	Sub-Division ml
403A106	25	1
403A107	50	1
403A108	100	*1
403A109	500	5
403A110	1000	10
403A111	2000	20

*ASTM distillation test

 

 

HEATER, HYDROMETER Gravity Sample.

For low gravity oil where the hydrometer gravity test cannot be made without heating the oil sample. Four models are available. Two models are water heated and two models are electrically heated. The water-heated models come in floor mounted or side mounted. The electrically heated models are floor mounted. The side-mounted model is drained from the bottom and requires no separate hydrometer cylinder. A drain valve is required. The floor mounted model requires a cylinder and is included as part of the unit.

Catalog Number	Type Mounting	Heating Source	Size In's	Weight Lbs.
403B112	Side	Water	16x5	6
403B113	Floor	Water	16x6	5
403B171	Floor	12VDC	16x7	7
403B172	Floor	120VAC	16x7	7

 

CYLINDER, Replacement.

403B114 Replacement cylinder for floor mounted units. (Aluminum)